Resizing your rings: Most rings can be resized

People resize rings for many different reasons. For some it is weight loss or weight gain, and for others it is easy to carry in a position to the ring on another finger. Sizing is very common and can be done on multiple rings, but there are some exceptions. To better understand the dimensions and can not be done, one must understand the process.

A smaller loop

Diamond Channel-Set

A reduction in the size of the group on a ring is very simple, if done by a jeweler. be reduced to the ring, theJeweler being cut off a small part of the band. The ring must then be converted into the right circle and then can be welded together again. The jeweler has a weld that is virtually invisible and has to be shiny and polished so that no conclusions on the size is visible.

This method can be easily used for the rings of a plain shaft or belt. Rings that are processed or a design that leads around the entire band, you need to be rebuilt on the size.Sometimes it rings developed on a sector that has been allowed for changeovers. This area is generally larger for the production of the ring, instead of smaller.

Some jewelry rings across the band or the style less than half the channel bandwidth, and may ask to remove the jewelry, gems before sizing. This depends on the attitudes and patterns. For smaller rings, and then the diamonds or precious stones moved to compensate for the setting of the ring.

One Ringlarger

Increase the size of a ring can be done in two ways. When a ring may be only slightly larger, sometimes a jeweler may have the ring that extends to the desired size. The ring must be cut and an additional piece of the shaft or belt to increase in size when a half size larger or to be welded. If a jeweler must be an artistically shaped ring or a set of precious stones in terms of size of the group may represent the sizing problem. The jeweler discuss the options may includeChange the setting.

not to re-size rings

You should not groped to resize a ring, the channel bandwidth of stones more than half. If the ring has an elaborate setting, or certain kinds of precious stones, some of the stones should be removed and reset before the ring can be resized. If the ring is an antique or an old white gold, there may be some discoloration around the repair site. It is not always possible for the jeweler to know the cause ofDiscoloration. Most jewelers are trying to minimize lines and discoloration in the ring. It is usually only noticeable when you use a magnifying glass. E 'essential to discuss the options with jewels.

Celtic rings with the design all around the band made slightly larger or smaller, but are not distortions of the model. Increased or decreased by a significant amount are usually not successful without distorting the model.

Resizing your rings: Most rings can be resized